Carton Compression test machine paper box Strength testing Equipment




Carton Compression test machine paper box Strength testing Equipment
 

TECSIS Compression force load cell 

 

TEST METHOD

Compressive resistance is one of the properties used to evaluate the ability of shipping containers, components, and unit loads to successfully survive the compressive forces they are subjected to during storage and distribution.

APPLICATIONS

This model is used for measuring the ability of packaging and container to resist external compression force. Also can be used to perform constant load test for packaging boxes or cartons. These tests are called B.C.T. (Box Compression Test). HD-A505S-1500 with 4 Transcell Load Cells for more scientific and accurant test , which will make the force of the specimen more uniform, and the test results will be more informative.

 

B.C.T can operate in five ways:

Ø Deformation under defined load: Test deformation under defined load of various corrugated cartons and beehive crates

Ø Load under defined deformation: Test load under defined deformation of various corrugated cartons and beehive crates

Ø Maximum load: test the maximum load of various corrugated cartons and beehive crates

Ø Stacking test: stack test of various corrugated cartons and beehive crates

Ø Cyclic test: dynamic strain according to strength & stroke

GENERL SPECIFICATIONS

Packaging Dimensions: (WxDxH) 2200*1500*2230mm

Power supply source: single-phase, 120V, 50/60Hz

Gross Weight: 1550kg (Approx.)

HS Code: 9024800000

TECHNICAL PARAMETERS

Item

Description

Max. Force

5000kg (50KN)

Load cell

4 Transcell load cell

Control system

Embedded PC-Windows 7, RS-232 interface

Motor

Panasonic servo motor w/ DC variable speed drive system, high-precision mechanical ball screw rod

Force reading

kgf, Ibf, N, KN, T etc

Load cell Resolution

1/250,000

Load Precision

within ±0.25%

Parallelism of Platens

Parallel within ±1.0mm

Effective test area

1500×1500×1700mm

Test speed

10 ±3mm/min (0.01~200mm/min adjustable)

Software

TM 2101

Data display

Load, displacement, speed, loading rate and elapsed time

Safety features

E-Stop

Over-load protection

Upper and lower limit switches

Load sensor with automatic retreat

 

QUALITY ASSURANCE

1. The guarantee period with FOC within 1 year (not including expendable parts cost and transport & travel fees)

1.1 During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part (just for non-expendable part) caused by non-human reasons;

1.2 If any quality problems occur within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by buyer;

1.3 If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by buyer, also charge for a favorable price for new parts;

1.4 Haida will provide a lifetime favorable price to the buyer for expendable & non-expendable parts used in system operation, equipment maintenance;

 

2. The following conditions need to be paid reasonably even in the guarantee period:

2.1 Natural disaster

2.2 Operating mistakes

2.3 Voltage is not fit for our manual

2.4 Uninstall without our guides

2.5 Damaged for borrowing to others

2.6 Damaged for without authorized machine modification

2.7 Damaged for without authorized calibration

2.8 Without authorized transshipment mistake

 

3. Attentions: the machine cannot be used following situations:

3.1 Vibration, rocking place.

3.2 Direct sunlight.

3.3 Hot, dusty, damp places.

3.4 To ensure safe, AC supply of the machine should be well grounded.

3.5 Do not use strong solvents (such as: benzene, nitro oil) washing machine.

3.6 Do not inject water and debris into the machine to prevent damage to electrical components and electrical shock.

3.7 Machine’s disassembly and debugging can only be measured by the State Department approved the units and the company, other people not allowed to overhaul.

Navigation